Development of Cuttability Chart for a Marble Cutting with Monowire Cutting Machine

Authors

  • Emre Yilmazkaya Department of Mining Engineering, Hacettepe University, 06800, Beytepe Ankara, Turkey Phone: +90 312 297 76 00 Fax: +90 312 299 21 55
  • Yilmaz Ozcelik Department of Mining Engineering, Hacettepe University, 06800, Beytepe Ankara, Turkey Phone: +90 312 297 76 00 Fax: +90 312 299 21 55

DOI:

https://doi.org/10.13154/icscm.3.2015.73-85

Keywords:

Monowire cutting, diamond wire, marble, wear, energy, optimization

Abstract

Monowire block cutting machines can be used for natural stone block squaring operations and slab
cutting operations from natural stone blocks. The efficient use of these machines reduces
operating costs by ensuring less diamond wire wear and longer wire life at high speeds. The
purpose of this study is to develop cuttability chart for real marble sample based on unit wear and
unit energy in monowire cutting system and also perform cutting optimization. For this purpose, the
full automatically servo controlled monowire cutting system which can cut blocks in three
dimensions were developed in Hacettepe University Mining Engineering Department. Cutting
experiments were performed at different wire rotation speed (peripheral speed) and wire downward
movement speed (cutting speed) on the real marble block which was transported to the laboratory.
A cuttability abacus in monowire cutting system taking into consideration the unit energy
consumption during cutting operation and unit wear on diamond beads was developed with Design
Expert 7.1 software for real marble sample by using the results obtained.

Downloads

Published

2015-11-25

Issue

Vol. 3 (2015)

Section

Session 3

How to Cite

Development of Cuttability Chart for a Marble Cutting with Monowire Cutting Machine. (2015). International Conference on Stone and Concrete Machining (ICSCM), 3, 73-85. https://doi.org/10.13154/icscm.3.2015.73-85